Club Car 2008 Lynx Box Bed, Руководство пользователя

Страница: 17 / 44

Controls and Indicators
2008 DS Electric Gold Standard Vehicle Owner’s Manual Page 15
TOW/RUN SWITCH
PowerDrive Plus and IQ System Vehicles
ý
WARNING
• Place Tow/Run switch in the TOW position before disconnecting or connecting the batteries.
Failure to heed this warning could result in a battery explosion or severe personal injury.
• When the Tow/Run switch is in the TOW position, all motor braking functions, including zero
speed detect, are disabled.
PowerDrive Plus and IQ System vehicles are equipped with a Tow/Run switch, located under the seat just
above the Forward/Reverse switch
(Figure 10) . The switch must be in the RUN position in order to operate
the vehicle. When the switch is in the TOW position, power to the vehicle electrical components is turned off
and the vehicle will not operate.
See following NOTE.
NOTE: After placing the Tow/Run switch in the TOW position, allow 10 seconds to elapse before switching
back to the RUN position.
After placing the Tow/Run switch in the RUN position, allow 10 seconds to elapse before operating
the vehicle.
The Tow/Run switch should be placed in the TOW position under the following conditions:
• Before Towing the Vehicle: Place the Tow/Run switch in the TOW position to disable all motor braking
functions, thus preventing possible damage that could occur to the vehicle or electrical components if
the vehicle is towed while the zero speed detect motor braking function is operating.
• Before Disconnecting or Connecting Battery Cables: Place the Tow/Run switch in the TOW posi-
tion to turn off power to the vehicle electrical system, thus preventing severe arcing and possible bat-
tery explosion as the battery cables are disconnected.
• For Long-Term Storage: Place the Tow/Run switch in the TOW position to turn off power to the vehi-
cle electrical system, thus preventing vehicle electrical components from discharging the batteries.
Figure 10 Tow/Run Switch