CLS Manuals
CLS Atmosphere LED-panel
www.cls-led.com
CLS PiXelbar 36
- 7 -
- 8 -
ChANgINg ThE LENSES OF ThE PIXELbAR 36
Step 1: Make sure no power is connected to the unit.
Step 2: Remove the side plate of the Pixelbar 36.
Step 3: Slide out the front cover plate of the Pixelbar 36.
Step 4: Carefully remove the lenses. By removing the lenses from the lens holders with a small flat
screwdriver. Be sure that the lens holder stays on the PCB. (see pictures).
Step 5: Change the lenses in the lens holders.
Note: When mounting the 25 x 45° lens be sure to mount the lens in the correct way; the vertical stripes
of the lens have to be at a right angle to the PiXelbar.
Step 6: Slide back the front cover plate.
Step 7: Mount back the side plate and make sure the screws are firmly tightened.
2007 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated
companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other loss
occasioned by the use of, inability to use or reliance on the information contained in this manual. No part of this manual
may be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information
can be found in our General conditions to be found on the back of your CLS-LED BV invoice or on our website
www.cls-led.com/Conditions.pdf
TEChNICAL SPECIFICATIONS
Input voltage:
100 ~ 240 VAC
Power consumption:
max 120 VA
LEDs:
36 x Luxeon
®
I
Colour:
RGB
Lens beam angle:
25°
(optional 25º x 45º lenses)
Weight:
3,8 kg
Shipping weight:
4,5 kg
Dimensions:
81 x 795 x 77 mm (hxwxd)
Shipping dimensions: 130 x 830 x 150 mm (hxwxd)
Working temperature: -10 °C to +40 °C
Communication:
DMX 512 (1990) 3-pin XLR
Housing:
First grade aluminum, black coated
Application area:
Indoor use only
IP value:
IP20
