8
ADVANCED SETUP MENU.
13. In Mix mode press and release EDIT to go to
the SETUP Menu.
14. The SETUP menu has some functions
intended for experienced users.
- RESET
- FADE ON or OFF
- PATCHING
15. RESET. Press and release the Rst button. This
takes you to the RESET PATCH MENU and a
WARNING in the display will ask if you are sure.
Confirming by YES will set all the Patching to
the factory default. The display shows you that it
is done.
16. FADE. Press and release the Fad button. This
takes you to the FADE menu. With this function
it is possible to select if a DMX channel should
has the possibility to fade or not.
Choose the Channel with the Master Fader.
Select On or Off by the respectively buttons.
This is possible to do on the first 128 Channels.
Channel 129-144 will always have Fade set to On.
If you want to set all channels to Fade On, press
and hold the On knob while moving the Master
fader slowly from the bottom to the top. This way
you can Reset the Fade On/Off
17. Why Fade On or Off menu ?
Ex: Let’s say that you have a movinghead and it has the color wheel on channel 1,
the gobo wheel on channel 2 and the pan and tilt on ch. 3 and 4. If the fader is on
(default) on every channel and you want the movinghead to move slowly
from one direction to another. At the same time you want to change color and
gobo. What will happened ? Yes, the movinghead will move slowly as you
programmed, but the color- and gobo wheel will also move slowly till it reach the
right color and gobo, resulting that it is changing colors and gobos in the hole
movement. When you have the possibility to turn off the fading on channel 1 and
2, the movinghead will changes the color- and gobo instantly, but the pan and tilt
will move slowly as it should.
SETUP
Rst Fad Ptch Xit
SETUP
Rst Fad Ptch Xit
RESET PATCH???
WARNING YES
NO
SETUP
Rst Fad Ptch Xit
Fade Ch: XXX OFF
On or Off Exit
DISPLAY TEXT
