7
Programming the CLS DMX144 continue...
7.
Set the Master Fader to its Maximum level.
Mix the lightnings the way you want it by
moving faders, select new Groups, moving
faders and so on, untill your scene is like you
want it.
8. It is now time to save the scene.
While holding down the Mem button, press
a Flash button where you want to save the scene.
The Display will tell you to choose a SCENE
and show you that the scene is saved.
If you want to copy a SCENE you just choose
a SCENE(See point 9) and repeat the above.
9. It is possible to edit a scene that is already
stored. While holding down the EDIT button,
press a Flash button for the Scene that you
want to edit. The Display will tell you to choose
a SCENE and show you that the selected scene
is loaded. Do the Editing and save it.
10. PROGRAM MODE.
Pressing and releasing Prg button takes you to
the PROGRAM MODE. This is the menu for
Running, Naming and Copying Programs.
Choose Programs with Prg and Flash buttons and
Scenes afterwards directly on Flash buttons.
11. Press and release Nam button. The Display
shows the Rename Menu. Change letter with
Master fader, and move the cursor with the
arrow buttons <- ->. Press Save to store the Name.
12. Press and release Copy button. The Display
shows the Copy Menu. While pressing the FROM
button, select the source Program with a Flash
button. Then while pressing the To button choose
the destination Program with a Flash button.
Press OK to confirm. The Display tells you that
the Scenes in the Program is copying and the
Program is copied when it is finished.
MIX PRG:PrgName
Grp Mem Edit Prg
Choose SCENE wi-
th flash buttons
Scene XX is now
saved...
MIX PRG:PrgName
Grp Mem Edit Prg
Scene XX is now
loaded...
MIX PRG:PrgName
Grp Mem Edit Prg
PROGRAM MODE
Prg Nam Copy Xit
Rename:........
<- -> Save Xit
PROGRAM MODE
Prg Nam Copy Xit
PROGXX PROGXX
FROM OK To Exit
DISPLAY TEXT
NB!
