www.cls-led.com
CLS Colour Par 12
- 4 -
- 9 -
0-4
No Macro or Scroll
5-9
Cool White
10-14
Lt. Blue
15-19
Blue
20-24
Purple
25-29
Blue Magenta
30-34
Magenta
35-39
Hot Pink
40-44
Pink
45-49
Red
50-54
Orange
55-59
Yellow
60-64
Lime
65-69
Lt. Green
70-74
Green
75-79
Teal
80-84
Cyan
85-89
Colour Scroll Snap Speed 1 (Fastest)
90-94
Colour Scroll Snap Speed 2
95-99
Colour Scroll Snap Speed 3
100-104 Colour Scroll Snap Speed 4
105-109 Colour Scroll Snap Speed 5
110-114 Colour Scroll Snap Speed 6
115-119 Colour Scroll Snap Speed 7
120-124 Colour Scroll Snap Speed 8
125-129 Colour Scroll Snap Speed 9
130-134 Colour Scroll Snap Speed 10
135-139 Colour Scroll Snap Speed 11
140-144 Colour Scroll Snap Speed 12
145-149 Colour Scroll Snap Speed 13
150-154 Colour Scroll Snap Speed 14
155-159 Colour Scroll Snap Speed 15
160-164 Colour Scroll Snap Speed 16
165-169 Colour Scroll Snap Speed 17 (Slowest)
170-174 Colour Scroll FADE Speed 1 (Fastest)
175-179 Colour Scroll FADE Speed 2
180-184 Colour Scroll FADE Speed 3
185-189 Colour Scroll FADE Speed 4
190-194 Colour Scroll FADE Speed 5
195-199 Colour Scroll FADE Speed 6
200-204 Colour Scroll FADE Speed 7
205-209 Colour Scroll FADE Speed 8
210-214 Colour Scroll FADE Speed 9
215-219 Colour Scroll FADE Speed 10
220-224 Colour Scroll FADE Speed 11
225-229 Colour Scroll FADE Speed 12
230-234 Colour Scroll FADE Speed 13
235-239 Colour Scroll FADE Speed 14
240-244 Colour Scroll FADE Speed 15
245-249 Colour Scroll FADE Speed 16
250-255 Colour Scroll FADE Speed 17 (Slowest)
colour macro/scroll mode
ch 6 : strobe
The Strobe functions in all modes. The strobe effect will toggle the Master Level between Off and its present
value.
0-4 No Strobe
5-255 Strobe Effect - Slow to Fast
sEtup aND opEratioN moDEs (LED sEgmENt DispLay)
The following refers to the different modes that are available on this fixture via the LED Segment Control Panel
display. All functions are selectable from the display menu located at the back of the fixture.
control panel menu
Use the fixture’s Control Panel to access the Control Menu. The MENU Key puts the fixture in the settings menu
itself and also acts as a BACK key between options, UP/DOWN moves through the menu options and allows the
assignment of a value.
The ENTER key is used to enter that option and confirms the selection once the UP/DOWN is used to adjust the
value. When in edit, the display will Flash. Settings are stored and recalled on subsequent power cycles. R, G, B,
refers to Red, Green and Blue respectively. DMX and master/slave modes require data cables to be connected
between fixtures. Manual and some stand-alone modes do not require data cables for independent use of the
fixture.
protection from electric shock
• Disconnect the power supply from AC power before installing, dismounting or maintening of the unit.
• Make sure all connectors are connected properly.
• Use only a source of AC power that complies with local building and electrical codes.
• Do not expose the unit to rain or moisture.
• Refer all service to a qualified technician.
protection from burns and fire
• Provide a clearance of at least 50 mm around the unit.
• Do not install the Colour Par 12 near a heat source.
• Do not install the Colour Par 12 in a corrosive, flammable or explosive area.
• Do not modify the Colour Par 12, or install other than genuine parts.
• Do not operate the unit if the ambient temperature exceeds 35 ºC.
• Operate in a well-ventilated area
protection from damage due to falls
• Verify that all covers and mounting hardware is securely fastened.
• Block access below the work area whenever installing or removing the unit.
