USER MANUAL :
DOCUMENT NAME
Very important here is the 'Vendor Code'. The
server will automatically populate the database that is associated with a specific
Vendor Code assigned to it. Data is matched between these systems using that code. This code is also used to separate
communications between different vendors, preventing the cross accessing of
Code is assigned to the relevant subsystem by the a
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. He
it is best to use wording that might explain something about where this logger has been applied.
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
arrow on the right of the entry field and select the applic
Since this logger has no onboard GPS, co-ordinates are recorded in the latitude and longitude fields which will be sent
through to the database during a reload device configuration event.
When using a simcard to connect to a GSM network, there are a couple of parameters that your GSM service provider will
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
connect but most will require them. The parameters a
APN Password and are entered in the 'Communications Setup' section.
Depending on where you are in the world, NBIoT networks operate on different bands. This information can be provided to
you by your NBIoT service provider. Alternatively, setting it '0' will cause the logger to automatically scan all the bands until
it finds the active one. Consider though, this will delay the connection time for the logger which will ultimately impact on
the battery. It is therefore advisable to establish the active NBIoT band and enter it into this field. Should you not be able to
get this information, you could select the '0' option, wake the logger up, and check to which band it connected in the
diagnostic streaming option. This parameter can then be changed to that value preventing the logger from having to scan
all the bands on later connections.
Data scrambling should be activated by default and will be used should your network support it.
Networks generally require you to enter the APN Name but the Username and Password are not necessary. These details
are obtained directly from your GSM service provider and most are published on their websites.
Cloudworks devices are also designed to allow
the APN details here will result in the device connecting to your private network.
address which will be shown in the 'Local IP' field in the 'General De
All Cloudworks devices connect to a server with a static IP or domain name. They usually use UDP/IP protocols and connect,
by default, on port 13000. If you are running your own server, the Server Name or IP address as well as Server Port numbe
need to be entered here.
Just a note, it is always better to rather use the IP address than the domain name. This will mean
that the logger will not have to execute a domain name lookup before connecting to your server. This is especially
important for NBIoT networks because of their slow communications properties.
MANUAL : CDS543 NIMBUS PULSE LOGGER
NAME
CLASSIFICATION
DATE
PAGE
Very important here is the 'Vendor Code'. The Cloudworks System supports multiple databases. What this means is that the
server will automatically populate the database that is associated with a specific logger. Each database and
Vendor Code assigned to it. Data is matched between these systems using that code. This code is also used to separate
communications between different vendors, preventing the cross accessing of loggers by unauthorised users. The Vendor
subsystem by the administrator during the creation of the database on the server.
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. He
that might explain something about where this logger has been applied.
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
arrow on the right of the entry field and select the application type you wish to apply.
ordinates are recorded in the latitude and longitude fields which will be sent
through to the database during a reload device configuration event.
to a GSM network, there are a couple of parameters that your GSM service provider will
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
connect but most will require them. The parameters are the NBIoT band and scrambling, APN Name, APN Username and
APN Password and are entered in the 'Communications Setup' section.
Depending on where you are in the world, NBIoT networks operate on different bands. This information can be provided to
your NBIoT service provider. Alternatively, setting it '0' will cause the logger to automatically scan all the bands until
it finds the active one. Consider though, this will delay the connection time for the logger which will ultimately impact on
ery. It is therefore advisable to establish the active NBIoT band and enter it into this field. Should you not be able to
get this information, you could select the '0' option, wake the logger up, and check to which band it connected in the
aming option. This parameter can then be changed to that value preventing the logger from having to scan
Data scrambling should be activated by default and will be used should your network support it.
require you to enter the APN Name but the Username and Password are not necessary. These details
are obtained directly from your GSM service provider and most are published on their websites.
devices are also designed to allow for the connection to custom private APN's for purposes of security. Entering
the APN details here will result in the device connecting to your private network. These networks normally issue a static IP
address which will be shown in the 'Local IP' field in the 'General Details' box.
All Cloudworks devices connect to a server with a static IP or domain name. They usually use UDP/IP protocols and connect,
by default, on port 13000. If you are running your own server, the Server Name or IP address as well as Server Port numbe
Just a note, it is always better to rather use the IP address than the domain name. This will mean
that the logger will not have to execute a domain name lookup before connecting to your server. This is especially
BIoT networks because of their slow communications properties.
PAGE
supports multiple databases. What this means is that the
. Each database and logger has a
Vendor Code assigned to it. Data is matched between these systems using that code. This code is also used to separate
s by unauthorised users. The Vendor
of the database on the server.
The description is a simple string of data that is stored by the logger and used to identify that logger in simple terms. Here,
Application types are explained in detail earlier in this document. To select an application type, simply click the dropdown
ordinates are recorded in the latitude and longitude fields which will be sent
to a GSM network, there are a couple of parameters that your GSM service provider will
need from you in order to connect to their network. These are sometimes not necessary as the card will automatically
re the NBIoT band and scrambling, APN Name, APN Username and
Depending on where you are in the world, NBIoT networks operate on different bands. This information can be provided to
your NBIoT service provider. Alternatively, setting it '0' will cause the logger to automatically scan all the bands until
it finds the active one. Consider though, this will delay the connection time for the logger which will ultimately impact on
ery. It is therefore advisable to establish the active NBIoT band and enter it into this field. Should you not be able to
get this information, you could select the '0' option, wake the logger up, and check to which band it connected in the
aming option. This parameter can then be changed to that value preventing the logger from having to scan
require you to enter the APN Name but the Username and Password are not necessary. These details
n to custom private APN's for purposes of security. Entering
These networks normally issue a static IP
All Cloudworks devices connect to a server with a static IP or domain name. They usually use UDP/IP protocols and connect,
by default, on port 13000. If you are running your own server, the Server Name or IP address as well as Server Port number
Just a note, it is always better to rather use the IP address than the domain name. This will mean
that the logger will not have to execute a domain name lookup before connecting to your server. This is especially
