CL7206B user manual
44
Imag 4-30 GPI configuration
Check: check the various port trigger parameters
Configuration: select the port need to set, click button to execute the settings after modify
Trigger start condition: select the mode from the drop-down list
Trigger execution instruction: select the mode from the drop-down list
Trigger stop condition: select the mode from the drop-down list
Description: when the start condition is satisfied, the reader will perform the configuration
of the reader/ writer command.
GPO configuration
Select “configuration” on the main interface > "GPI/O configuration" > " GPO configuration
"then pop-up dialog box, as shown in image 4-3:
Image 4-3 GPO configuration
CL7206B reader only supports four GPO outputs, that is "1" “2”,.
Select the high / low level, click this configuration to execute settings after modify.
4.5.14 Others
Wigand configuration
Select “configuration” on the main interface --> "GPI/O configuration" --> “Wigand "then
pop-up dialog box, as shown in image 4-30:
