Reach-in Configurations -
Wall-to-Wall
© 2018 ClosetMaid LLC | Ocala, FL 34471 | 1-800-874-0008 | www.closetmaidpro.com
INSTALLATION INSTRUCTIONS
Tools needed:
Tape measure, level, pencil, #2 Philips head screw driver or power drill with a 6" #2 Philips bit,
Midre saw with
12" dia. x 1/8" thick
wood-cutting blade (for cutting shelf), optional drill template, tube cutter, hacksaw (for cutting closet rod)
Parts required:
Shelf, backwall channel, sidewall bracket, universal pole cup, shelf and rod angle brackets or shelf angle
brackets, closet rods, closet rod end caps, shelf trim, drywall fasteners [Easy anchors with #8 x 1-1/4" flat head wood screws], stud
fasteners [4.5 x 60 mm wood screws], #6 x 5/8" flat head wood screws [for securing components to the shelf or shelf to hardware]
and self-tapping screws [to secure the closet rod to the universal pole cup]. Make sure you have the right sizes and universal end
caps as applicable.
Replacement Warranty:
You must follow the manufacturer’s instructions supplied by ClosetMaid to ensure eligibility for the
replacement warranty.
For video instructions: Visit www.closetmaidpro.com/ExpressShelf.
Premium Wood Collection
1
