Cloogy RENEWABLES UPGRADE, Быстрый старт, Страница: 14 / 24

13
Place the Transmitter Generation inside your
microgeneration switchboard cabinet or outside. Put back
the protective panel. Turn on the general circuit breaker.
10
11
12
Open the Clamp and place it around the neutral wire
previously identified. Close the Clamp.
Connect the Clamp to the Transmitter Generation.
The first communication between the Transmitter
Generation and the Cloogy
®
portal can take up to 30
minutes. If after this period no data is available on the portal
check if the Transmitter Generation is paired:
13