Page 6
MR88 Rear Panel
External Control
Link In
A
B
Link Out
RS232
Outputs
Input Channels
Pre-Amp Outputs
6
7
8
5
4
3
2
1
DC
Input
7
5
3
1
8
6
4
2
CLOCKAUDIO
Made in EEC-UK
1) External Control Connector. Provides access to the open-collector
outputs, the external control inputs, and the two VCA connections.
2) RS232 Connector. For control and setup of MR88 mixers. Control
extends through link connections to multiple mixers.
3) Link In/Out. Used for daisy chaining of multiple MR88 mixers when
more than 8 input channels are required. Uses standard RJ45 network
leads.
4) Balanced Outputs. The MR88 has two XLRM-type connectors with
individually or linked adjustable output gains to give nominal output
levels of -60 to 0dBV. This can be setup to be controlled by external
VCA’s for remote operation.
5) Pre-Amp Outputs. Individual channel –10dBV outputs on RCA phono
connectors for tape recording pre-mix channels.
6) Source Inputs. XLRF-type connectors. Balanced inputs for low
impedance dynamic or condenser microphones, line inputs and audio
equipment (CD players etc). Input gain adjustable from front panel.
48V phantom power can be selected from front panel for microphones.
7) Power Input. External 15V power supply.