CLIVET WSAT-YES 18.2, Руководство пользователя

Страница: 52 / 68

Saftey
Operate in compliance with safety regulations in force .
Use single protection devices: gloves, glasses, helmet etc.
usare dispositivi di protezione: guanti, occhiali, elmetto ecc.
General
Maintenance must be performed by authorized centres or by
qualified personnel
The maintenance allows to:
 maintaining the unit efficient
 reduce the deterioration speed all the equipment is subject to
over time
 collect information and data to understand the efficiency state
of the unit and prevent possible faults
WARNING
 Before checking, please verify the following:
 the electrical power supply line should be isolated at the
beginning
 the line isolator device is open, locked and equipped with the
suitable warning sign
 make sure no tension is present
 After switching the power off, wait at least 5 minutes before
accessing to the electrical panel or any other electrical
component.
 Before accessing check with a multimeter that there are no
residual stresses.
Frequency of interventions
Perform an inspection every 6 months.
However, frequency depends on the type of use.
Pan inspections at close intervals in the event of:

frequent use (continuous or very intermittent use, near the
operating limits, etc)
 critical use (service necessary)
WARNING

Before performing any work, please read carefully:
SAFETY WARNINGS FOR OPERATIONS ON UNITS CONTAINING
R32