8
C. GC25E UP Series Joint Clean Out and Concrete Saw
Specifications
Dimensions/Weight GC25E
UP
Length (Working)
42-23/32” (1,090mm)
Length (Transport)
32: (813mm)
Width 18-1/8"
(460mm)
Height 42-23/32”
(1,090mm)
Frame Width
18-1/8” (460mm)
Pointer Length
8-7/32”(209mm)
Blade To Wall
7-1/2” (190mm)
Wheel Base Length
19” (483mm)
Blade Shaft Maximum Height
9-41/64” (245mm)
Weight Created
155 lbs (71 kg)
Weight Uncreated
135 lbs (61 kg)
Power Source
Engine/Motor Mfg.
Gangfon Motor
Spec No.
Totally Enclosed Air Cooled Thermal Protection
Power Source
Electric
Maximum Horse Power
1
3
HP
Net Horse Power
3 HP
Max Torque
-NA-
Power Source RPM
3450 RPM
Model Dual
Voltage
Cooling System
Forced Air
Voltage 115-230
volts
Cycles/Current/Phase 60Hz/AC/1
Full Load Amps (115/230 volts) 15/7.5
Amps
Starting Amps (115/230 volts)
2
45/22.5
Amps
Starter Capacitor
Characteristics
Max Blade
Ø10" (254mm)
Depth of Cut
10” (254 mm)
3.5" (88mm)
8” (203 mm)
2.5" (63mm)
Arbor Bore
5/8"
Blade Shaft Flange Diameter
3-5/64” (78mm)
Blade Shaft Speed
2905 rpm
Depth Control
Hand Wheel With Screw Feed
Blade Rotation
Counter Clock Wise (Up Cut)
Depth Lock
Standard
Depth Gauge
Standard
Number Of V-Belts
1
Blade Guard Type
Screwed On, All Steel Construction
Cutting Side
Center
Lifting Bale
Built In
Handle Bars
Adjustable, Stays Level At All Times
Wheels Non-marking
Wheel Size Front and Rear
3-3/8”x2-3/4”x25/32” (85x70x20mm)
Vacuum Port Size
2” OD
1) Net Horsepower Rating provided by engine the manufacturer measured in accordance to SAE j1349 @ 3,600 RPM. The engine may vary from this value. Actual
horsepower on the machine will vary due to operating speed of engine, belt tension, environmental conditions, machine maintenance, and other variables.
2) Starting Amps are instantaneous – for best results use with a 30Amp circuit.
