Clipper ECHO SOUNDER, Руководство пользователя

Страница: 18 / 20

ENTER SHALL DEEP ILLUM
METRES
ENTER SHALL DEEP ILLUM
METRES
Figure 11 - Switching Between Averaged and Fast Display Modes
RETURNING TO NORMAL ECHOSOUNDING
Press the ILLUM button to return to normal echo sounding at any
stage. All the settings are stored, and will return again whenever
the unit is switched on. Returning to configuration setting from
normal echo sounding is not available. If further configuration
changes are desired, they can be made only by switching the unit
off and then on again with ILLUM pressed during the start-up
time, as described above.
REMOTE REPEATER FACILITY
A repeating display is available for use with the Clipper
Echosounder. The repeater cable is plugged into the rear of the
master instrument.