Clipper C13SPE, Руководство пользователя

Страница: 9 / 30

9
II. OPERATION
Read and understand this manual before
running or using the machine!
A. Installing the Blade
1. Disconnect the spark plug and then insert the Blade Shaft Locking Pin
into the Blade Shaft Locking hole.
2. Remove the blade shaft nut, (Turn clockwise)
, and remove the outside
collar.
3. Clean off any foreign particles on the clamping surfaces of both collars
and on the mounting surface of the blade.
4. Place the blade on the blade shaft, lining up the drive pin hole in the
blade with the drive pinhole in the inside collar.
Use only Clipper Diamond Blades. This machine was not
designed for the use with abrasive blades.
5. Slide the outside blade shaft collar onto the blade shaft . The drive pin
on the outside collar must project through the drive pin hole in the
blade and into the inside collar.
6. Tighten the blade shaft nut (counter-clockwise) securely against the
outside collar and remove the Blade Shaft Locking Pin.
7. Reconnect the spark plug.
Blades Use Only Clipper Diamond Blades