7
z
When paring is successful, short and high-pitched tone will sound and the blue light on LED will
flash 5 times.
z
To connect the headset to another type of device (a PDA, for example), the device must
support Headset or Handsfree Profiles. Refer to the user manual of the other device to set up
the headset and follow above instruction again.
z
If the HCM-100 is in "Pairing Mode" over 3 minutes without being paired to any device, the
headset will turn off automatically.
[Auto connection]
z
Power off in connection with a mobile phone
When the HCM-100 is turned off when it is already connected to a mobile phone, the
headset and mobile phone will be disconnected. The Headset and mobile phone will be
automatically reconnected when the HCM-100 is back to power on without pairing process.
(The mobile phone connected to the headset recently should be in range of 10m)
z
Out of cover range from a headset
When the HCM-100 and your mobile phone are placed with distance of over 10m, the
headset and mobile phone will be disconnected. They will be automatically reconnected
when both devices are brought back in a required range (10m) within 3minutes after
disconnection. If time has been passed over 3 minutes after disconnection, maximum 10
minutes will be required for auto-reconnection. If you want to connect it manually, briefly
press the multifunction button once.
[Volume control]
Briefly press the VOLUME UP [
▲
] or VOLUME DOWN button [
▼
] to adjust the speaker volume.
Eight levels of volume control is available.
Handling Calls
[Answering calls]
The Headset and mobile phone will ring when there is an incoming call. You can answer a call by
pressing the multifunction button briefly. (Receiving a call through a mobile phone is also available)
[Making calls]
A call from the mobile phone will be transferred to the headset automatically subject to the function
set up of the mobile phone. If it is not automatically transferred, you can transfer it manually by brief
pressing the multifunction button on the HCM-100 (headset and mobile phone must
be paired prior to this process).
[Voice dialing*]
-If your mobile phone supports the voice dialing function, the headset will activate this function by
brief pressing the multifunction button once. A short tone will sound when you briefly press the
multifunction button and say the registered name on the voice dialing list.
* Note: If the mobile phone does not support the voice dialing function, it will try the last number you
dialed. Due to the design of some mobile phones, the Headset may auto-disconnect even if it is
powered on, and will not beep when receiving an incoming call.
[Last number redial*]
Press and hold the multifunction button for 1 second to hear the “beep” and "Last Number Redial"
function will be activated to call the last number dialed.
[Ending calls]
Содержание HCM-100
Страница 1: ...Bluetooth Mono Headset HCM 100 User manual...
