IMPORTANT ELECTRICAL WARNINGS
GENERAL SPECIFICATIONS
UNPACKING & SETUP
Models 6361 & 6361-665
Total Load Capacity (including force) .......... 850 lbs.
Overall Width .................................................... 45"
Overall Depth .................................................... 32"
Seat Height Range ..........................21
1
/
2
" to 29
1
/
2
"
Arms Height Range .............................................. 8"
Models 6362 & 6362-665
Total Load Capacity (including force) .......... 850 lbs.
Overall Width .................................................... 52"
Overall Depth .................................................... 32"
Seat Height Range ..........................21
1
/
2
" to 29
1
/
2
"
Arms Height Range .............................................. 8"
Storage & Transportation
Temperature ................................. 20º F to 150º F
Humidity .........................................-10% to 90%
Operation
Temperature ................................. 50º F to 100º F
Humidity .......................................... 30% to 75%
All Clinton Power Series, Bariatric, Blood Drawing Chairs ship fully assembled. However, care should be taken
when unpacking the chair so as not to damage the equipment.
BEFORE STARTING TO UNPACK THE EQUIPMENT inspect the boxes for damage that may have occurred during
the shipping process. Clinton uses every packaging option available to insure that equipment arrives at its
destination in factory condition, however, Clinton Industries has no control over third party handling once it
leaves our facilities. Report any visible damage to Clinton and the shipping carrier immediately.
After the package is inspected for visible damage, follow the unpacking steps below.
CAUTION:
Do not use a knife or other sharp object that may puncture or damage the upholstery
during the unpacking process.
CAUTION:
Clinton Power Series, Bariatric, Blood Drawing Chairs are heavy. Clinton Industries
recommends two reasonably strong individuals using proper lifting techniques to lift or move
the chair. Not using the recommended number of movers may result in injury to the persons
attempting to lift or move the equipment.
CAUTION:
Always lift the chair by the metal frame to avoid damage to the equipment.
WARNING:
When performing any procedure that requires use of electrical instruments or equipment,
the patient must be insulated from the metal portions of the chair with non conductive material.
Failure to do so mat result in electrical shock or injury to the patient or attendant.
WARNING:
Always use 110v, 60hz alternating current. Failure to use the proper electrical connection
may result in electric shock to patient and attendant and will result in damage to the equipment.
WARNING:
Never use this chair in oxygen rich or other explosive environment. Failure to do so
could result in flash fire or explosion which could result in serious injury or death.
4