3
Information in this document is subject to change without notice.
Basic Setup Guide
: CE-M21A-PIR / CE-M27A-PIR / CE-M32A-PIR
02.08.19
DISPLAY – Image Modes
*continued
SD CARD
Switch HDMI:
The screen will switch back-and-forth
from the HDMI input to the camera image at set time
intervals
Switch SD Video:
The screen will switch back-and-
forth from the camera image to the SD Card content at
set time intervals.
SD CARD
SD CARD
Camera VOV Switch:
The screen will display the SD
Card content in the corner of the screen at set time
intervals over the camera image.
Motion VOV:
The camera image will be full screen with
no motion, when motion is detected by the PIR sensor
the SD Card content will be shown over the camera in
the corner of the screen.
SD CARD
Alarm VOV:
SD Card content will be full screen until
triggered by the Alarm Input— when triggered, a
“Return to Cashier” message will flash on the screen.
Alarm:
The camera image will be on the screen until
triggered by the Alarm Input— when triggered, a
“Return to Cashier” message will flash on the screen.
