Clinton Electronics CE-M21A-PIR, Основное руководство по настройке

Страница: 2 / 7

Information in this document is subject to change without notice.
2
Basic Setup Guide : CE-M21A-PIR / CE-M27A-PIR / CE-M32A-PIR
02.08.19
DISPLAY – Image Modes
SD CARD SD CARD
SD Video:
Only content (images or video) from the
SD Card player is shown on the screen, no switching
occurs.
Motion:
When no motion is detected content from the
SD Card will be shown on the screen, when motion is
detected by the PIR sensor the screen will switch to
the camera image.
Camera:
Only the camera image is shown on the
screen of the PVM, no switching occurs.
HDMI:
Only a connected HDMI input is shown on the
screen of the PVM, no switching occurs.
:
:
:
Camera 1920x1080@30Hz
Display
Aspect Ratio
Motion Dwell Time
Full Screen
Motion
5 Sec.
Image Mode
Press the ‘MENU’ button on the included remote or the buttons located on the back of the PVM to adjust menu
settings. Navigate up/down through the menu, press Enter to select an option and left/right to make adjustments.
Press the Exit button to escape from a menu option and to exit the OSD menu.