If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorised technician.
Problem
Nothing appears on
the screen.
The image on the
screen is not clear.
• Check the power connections.
• Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with a
soft clean lint free cloth.
• Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
The image on the
screen is dark.
• Adjust the contrast control of the monitor.
• If you have an intermediate device, set the 75
Ω
/ Hi-z properly.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that an appropriate power source is
connected to the camera.
The DAY/NIGHT menu
does not work.
• Check that AGC in the EXPOSURE menu is set
to 'OFF'.
The SENS-UP function
does not work.
• Check that AGC in the EXPOSURE menu is not
set to 'OFF'.
• Check that SHUTTER in the EXPOSURE menu
is not set to 'A.FLK' or 'MANUAL'.
Solution
The Motion Detection
function does not
work.
Color is not correct.
• Check that ALARM in the SPECIAL is not set to
'OFF'.
• Check the WHITE BAL settings in the CLINTON menu.
The screen flickers
continually.
• Check that the camera isn't facing toward a bright
light source, such as the sun.
MENU EXIT OPTIONS
CLINTON
WDR CONTROL
EXPOSURE..
WHITE BALANCE
FLUORESCENT
D/N CONTROL
SHARPNESS..
SATURATION..
SPECIAL..
MENU EXIT OPTIONS..
MEDIUM
ATW..
OFF
AUTO
MENU EXIT OPTION
SAVE&EXIT.
DEFAULT.
CANCEL.
26
High Resolution Color Wide Dynamic Dome Camera
27
High Resolution Color Wide Dynamic Dome Camera
■
How to Use the Camera
●
SAVE&EXIT
: Saves all the setting menus and then exits.
●
DEFAULT
: Resets the camera settings to the factory defaults.
●
CANCEL
: Cancel to the camera settings.
Troubleshooting
■
