Receive signal from the In-Car DAB+ radio
through FM transmission
--Select FM Transmitting Frequency (Auto):
1. Press “TX/SCAN” button to show FM transmitting
frequency (TX FREQ).
2. Then press and hold “TX/SCAN” button for 3 seconds to
activate the automatic scanning of a “vacant” transmission
frequency without interference with other channels. The
scanning process will take 20-30 seconds to scan the
frequency automatically with a flashing display of
“---.-MHZ” and stop at a “vacant” frequency.
3. Press “TX/SCAN” button again to confirm and exit setting
or it will automatically confirm and exit the setting after 3
seconds. The selected “vacant” frequency (TX FREQ) will
be shown at the top of the display, e.g. TX108.0MHz
4. Then tune your car FM radio system to the selected
“vacant” frequency (TX FREQ) for transmission of the
audio signal from your In-Car DAB+ to your car stereo
audio system.
6
www.clintdigital.com
English
