USER MANUAL FOR MK3 PANEL - COMPACT & SPLIT UNITS
MK3 is a control system with innovative features for Climma independent units:
a) large digital display
b) simple settings by means of two rotating knobs
c) On-Off with a single push button
d) 8 fan speeds automatically or manually selecteable
e) automatic selection of the functioning mode either Cool for summer or Heat for winter
f) automatic display and LED dimming
g) temperature sensor incorporated in the panel. Remote sensor optional
AIR- CONDITIONER ON-OFF
Rotating knob for
temperature
setting
Ambient light
sensor
Mode LEDs
On-Off push
button
Rotating
knob for fan
speed
setting
A simple push of the button starts (or stops) the air-conditioner. The start is confirmed by either the Cool or Heat
LED. A dot in the bottom right corner of the display shows that the compressor is running
Indication dot of the
compressor status
2 digits digital display
It shows the ambient
temperature
pag.5/8
Temperature
sensing tip
Temperature
setting rotating
knob
The right side rotating knob permits the temperature setting. Touching the knob will immediately show the actual
temperature setting on the display. Rotating the knob will change the value. As you release the knob the display will
blink and memorize the new value and then show again the ambient temperature.
TEMPERATURE SETTING
The temperature range goes from 15°C (59°F ) and
30°C (86°F ).
The suggested comfort value is 22°C -24°C (71°-
75°F ) for the summer and 20°C– 22°C (68°-71°F ) for
winter. Exceeding the min or max values is not
suggested and may cause malfunctioning of the air-
conditioner.
C861-01 – 02/2014
