Climax BF-R, Руководство по эксплуатации

Страница: 35 / 68

P/N 102823, Rev. 0 Page 23
4 OPERATION
IN THIS CHAPTER:
4.1 P
RE
-
OPERATION CHECKS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
4.2 O
PERATION CAUTIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -23
4.3 O
PERATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -24
4.4 A
DJUSTING FOR ANOTHER AXIAL DEPTH OF CUT
- - - - - - - - - - - - - - - - - - - - - - - - - - - -31
4.5 D
ISASSEMBLY
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -31
4.1 P
RE
-
OPERATION CHECKS
Do the following checks before operating the machine:
1. Complete the risk assessment checklist in Table 1-3 on page 5.
2. Check that the work area is clear of non-essential personnel and equipment.
3. Check that the machine control/observation area will not be in the path of
hot flying chips during machine operation.
4. Check that the machine is securely mounted to the workpiece.
5. Check that air hoses are routed and secured to avoid tripping, entangle-
ment, damage from hot chips, or other damage should an air hose or con-
nection fail.
6. Check the tool condition and sharpness.
7. On the inline lubricator, check that the oil drip rate is set to 6 drips per min-
ute.
8. Check that all hand tools are removed from inside the machine and the
work area.
CAUTION
Leaving the workspace with the machine running and unattended may
cause personnel injury and machine or workpiece damage.
4.2 O
PERATION CAUTIONS
Do not operate the tool if the throttle safety lock is not functioning properly. Push
the lock forward to operate the throttle.