Climax BF-R, Руководство по эксплуатации

Страница: 19 / 68

P/N 102823, Rev. 0 Page 7
2 OVERVIEW
IN THIS CHAPTER:
2.1 F
EATURES AND COMPONENTS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
2.2 C
ONTROLS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12
2.3 D
IMENSIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -14
2.4 S
PECIFICATIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -15
2.5 I
TEMS REQUIRED BUT NOT SUPPLIED
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16
2.1 F
EATURES AND COMPONENTS
The BF-R is a H&S flange facer model that includes premium
flange facing conversion accessories. It is powered by reliable
pneumatic motors to accurately meet your job site or shop
requirements.
The BF-R is portable, making it ideal for use in the field.
Setup and operation may be handled by a single worker. It
weighs 25 lb (11.3 kg) with a 2" (51 mm) collet installed.
The machine uses collets or wedges to attach the machine to
the workpiece by extending them in the inside diameter (ID) of
the tube.
Standard wedge plates or the collet system can be used for
internal locking.
Centering and squaring device, such as the alignment gauge,
make accurate machining of gasket surfaces or bolt patterns simple and safe.
For detailed specifications, see Table 2-6 on page 15.
Figure 2-2 on page 8 shows major BF-R components.
BF
F
IGURE
2-1. BF-R
MODEL