ClimateRight easyair CR12000SACH Скачать руководство пользователя страница 2

2

INTRODUCTION

Thank you for choosing ClimateRight. This owner’s manual 

will provide you with valuable information necessary for the 

proper care, installation, and maintenance of your new product.  

Please take a few moments to thoroughly read the instructions 

and familiarize yourself with all the operational aspects of your 

new ClimateRight Mini-Split Air Conditioner and Heater.

For your records, please attach a copy of your 

sales receipt to this manual.  

Also, write the store name/location, date purchased, 

and serial number below:

Store Name: ____________________________________________

Location: _______________________________________________

Date Purchased: _________________________________________

Serial Number:  __________________________________________

PACKAGE CONTENTS:

Model

CR12000SACH

Suitable Applications

Garages, Sheds, Cabins, 

Greenhouses, Room Additions, 

Apartments, Condos, Sun rooms, 

Tiny Houses

Warranty

3 Years Parts and Labor,

5 Years on Compressor 

Features

Airflow (cfm)

323

Modes of Operation

Heating, Cooling, Fan, Dehumidify, Auto

Delay Timer

24 Hour On/Off

Fan Speed

4 Speeds High | Medium | Low | Auto

Duct System

Through-wall with 2.75” diameter 

hole

Mount

Interior: Wall Mount 

Exterior: Level Surface

Plug Type

Parallel/NEMA 5-15

Control Panel

Temperature Display Only (operates 

with remote)

Remote Control

Infrared Remote

Compressor

Rotary

Thermostat

Digital

Refrigerant

R410a (800g) Line Set is Pre-charged

Filter

Included, washable

Noise

Interior Unit: 42 dB 

Exterior Unit: 53 dB

Capacity

Cooling BTU

12,000

Dehumidification (pts./hour)

1.25

Heating BTU

14,000 (heat pump)

Approximate Max Enclosure 

Size 

500-550 sq. ft. (Well insulated)

Power

Cooling - Rated Amps 

(operating)

11.3A

Cooling Watts (W)

1,170

Voltage (Max) (V)

115@60hz

Heating - Rated Amps

15.4A

Heating Watts

1,280

Weights and Dimensions

Interior Unit Dimensions 

31.5” x 11.0”x7.5” 

Exterior Unit Dimensions 

32”x10.1”x21.3”

Interior Unit Case Dimensions  34.5”x16.1”x13.9”
Exterior Unit Case Dimensions  36.2”x13.2”x24.4”
Interior Unit Weight 

30.86 lbs

Exterior Unit Weight 

70.55 lbs

Interior Unit Case Weight 

35.25 lbs

Exterior Unit Case Weight 

74.96 lbs

Length of Line Set

16 feet

Evaporator (indoor unit)

16' Line Set (pre attached to 

back of evaporator)

Condenser (outdoor unit)

SPECIFICATIONS

Drain Hose

Hole 

Cover

Manual

Utility Power Cable

Remote with

(2) AAA Batteries

TABLE OF CONTENTS

Introduction & Contents   . . .2

Product Specifications

  . . . .2

Safety Instructions . . . . . . . .3
Product Description   . . . . . .4
Indoor Unit Digital Display . .5
Remote User Guide . . . . . . .5
Remote Diagram  . . . . . . . . .6
Pre Set-up Instructions  . . . .7
Indoor Unit Installation   . . . .7

Outdoor Unit Installation  . .10
Wiring Outdoor Unit   . . . . .12
Maintenance  . . . . . . . . . . .14
Troubleshooting . . . . . . . . .14
Error Codes  . . . . . . . . . . . .14
Warranty   . . . . . . . . . . . . . .16

Содержание easyair CR12000SACH


















Отзывы: