5.
Route the pet heater power cord through the cord hole.
Air outlet
6.
While holding the heater in place, secure it with the self-
tapping screws.
7.
Plug the Pet Heater into a GFCI outlet.
Note:
If using an extension cord, it must outdoor rated and
3-prong grounded, with a minimum of 18 gauge wire.
OPERATION
CONTROLS
Open the cover to access the controls. Push the power
switch to turn the unit ON.
HEATER LED
FAN LED
HEAT CONTROL
KNOB
POWER SWITCH
HEAT CONTROL KNOB
When the heat control knob is in the OFF position, only the
fan operates and the green FAN LED is illuminated.
When in the LOW, MED, or HIGH position, both the fan and
the heater operate and the red HEATER LED is illuminated.
Turn the heat control knob to the desired temperature. When
the set temperature range is reached, the thermostat will
automatically maintain the temperature by cycling the heater
on and off.
Heat Mode
Temperature Range
Low
52–65 °F (11–18 °C)
Medium
66–81 °F (19–27 °C)
High
82–95 °F (28–35 °C)
Note:
The actual temperature range for each heat position
will fluctuate with the ambient air temperature and
the insulation value of the enclosure. An insulated
enclosure with a door is recommended.
3
