11
Connect to Wi-Fi Overview
Join a Thermostat to Skyport
If the thermostat is connected to the local Wi-Fi access point but not yet
joined to an existing Skyport account, you may join the thermostat to the
account by doing the following:
1. Log in to your Skyport account.
2. Select the “Location” you want to add a thermostat into.
3. Select “+ Add thermostat”. A screen will ‘pop-up’ asking for a
six digit code.
4. Press the OVERRIDE button on the thermostat for 5 seconds.
5. Press the WARMER button on the thermostat.
6. A six digit code will appear on the thermostat’s display.
7. Enter the six digit code into your Skyport account.
Wi-Fi Status Screens
Press and hold the OVERRIDE button on the thermostat for 5 seconds.
When “Wireless Setup Menu” appears on the display, press the MODE
button. Pressing the up or down button will sequence through the
following information:
• AP Name
• AP Signal Strength
• IP Address
• Mac Address
• Update Skyport Firmware
• API Status
Содержание AVB32V02C
Страница 47: ...P N 88 1357 rev 3 01 10 20 ...
