ClimateMaster ACDU03, Руководство по эксплуатации

Страница: 7 / 12

7
A C D U 0 3 C o m m u n i c a t i n g S e r v i c e To o l
R e v. : N o v e m b e r 3 , 2 0 1 7
Two
connections
on DXM2
board to allow
for multi-unit
installation
Or
AIRFLOW SELECTION
TT026 S N - - - - - 1 2 3 4
TT026 S N - - - - - 5 6 7 8
TT038 S N - - - - - 9 0 1 2
PREVIOUS SELECT
OPTION SELECTION
TT026 S N - - - - - 1 2 3 4
TT026 S N - - - - - 5 6 7 8
TT038 S N - - - - - 9 0 1 2
PREVIOUS SELECT
3.6 MULTI-UNIT CONFIGURATION
If multiple units are connected to one ATC thermostat upon
unit start-up, the thermostat will automatically register the
serial numbers of all units connected to it.
NOTE: Multiple units may be connected directly to the ATC
thermostat or connected to one another in series, as shown
by the fi gure below.
3.6.1 MULTI-UNIT AIRFLOW SELECTION
In section 3.1, when an installer selects “Airfl ow Selection”
from the System Confi guration menu, the installer may
choose the unit to confi gure by the last 4 digits of its serial
number from the following screen.
3.6.2 MULTI-UNIT OPTION SELECTION
In section 3.2, when an installer selects “Option Selection”
from the System Confi guration menu, the installer may
choose the unit to confi gure by the last 4 digits of its serial
number from the following screen.
3.6.3 Multi-Unit, Unit, Pump, & Valve Confi guration
To confi gure Unit, Pump, and Valve options in sections 3.3-
3.5, the thermostat must be connected to only one unit at a
time.