CLIMASTAR OPTIPLUS 1600, Руководство пользователя

Страница: 7 / 60

7
5.SETTING UP
5.1- STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. Press to turn on the radiator, ECO light turns on.
5.2- CONFIGURATION OF SETTING TEMPERATURE
Once the unit is ON, press to select the desired temperature. Depending on the temperature selected, light displayed is different; see
images below.
18 Grad 19 Grad 21 Grad
22 Grad
24 Grad
5.3 SELECT THE OPERATION MODE
There are 4 operating modes:
•
Manual.
• Timer ON

OFF
•
Timer OFF

ON
• Replay.
Manual Mode
The user determines the setpoint temperature.
To select temperature, press repeatedly until the light activates on the desired temperature (see figures 5.2).
Timer ON

OFF Mode
The device will work at the preset temperature as per user’s configuration
To select the temperature, press
Press

to select the operating time. By pressing

repeatedly, operating hours or a combination of operating hours will be selected.
E.g.
The unit is programmed at 21ºC during 5 hours.
To deactivate the timer function press

repeatedly until the time LEDs are deactivated
Timer OFF

ON Mode
The device will stop working as per user’s configuration.
On starting the device again, press to select the temperature to reach.
Press during 2 seconds to switch to OFF mode.
Press

to select the switch-off time of the device. Press and hold

repeatedly to select the operating hours or the combination of
operating hours of the device. E.g.
The device is disconnected during 5 hours
To deactivate the timer function press

repeatedly until the time LEDs are deactivated.
Replay Mode
Press to select the desired temperature.
Press

to select the operating cycle. By pressing it repeatedly, programmed hours or a combination of programmed hours will be
selected.
To select the replay mode, press

for a few seconds, time lights start to flash, replay mode is activated.
Programming time starts as soon as it is set. E.g.
The unit is set to connect and disconnect every 4 hours.
If it was set at 8 a.m., the heater works as shown below.
Press

once to deactivate the replay mode.