11
Summary of steps to adjust your thermostat
If you are not going to use the air conditioner for a while, switch the thermostat to
standby mode. The display should indicate standby ( ) (
). Otherwise, if you are
going to use your air conditioner, the operational mode indicator ( ) should appear
on the display. Use the power key ( ) to switch between operational and standby
modes.
‚
Use the heat/cool operation mode key to select heating or cooling. A flame
indicator on the screen (
) indicates that the device has been adjusted for heating,
while a snowflake represents cooling. A combined heat/cool indicator, if available,
shows that the device may automatically change between heating and cooling based
on the set temperature and the room temperature. A blow sign indicates that the fan-
only mode has been selected, and the air conditioner blows the air without heating or
cooling the air. The last two modes may not be supported by all air conditioner types
and accordingly may not be available in all thermostat models.
ƒ
Adjust your desired fan speed using the fan speed key ( ). If the highest fan speed
is selected and the fan speed key ( ) is pressed again, the device enters the
automatic fan speed changeover mode, which determines the most desirable fan
speed automatically. To select the fan speed manually again, press the fan speed key.
The device will exit this mode and the lowest fan speed will be selected.
„
Use the “+” ( ) Or “-” ( ) key to increase or decrease the set temperature. 25°C is
normally suitable for most people and environments.
®
Enjoy using your Climaset .
Summary of steps to adjust your thermostat
