Climadiff DOPIOVINO/1, Инструкции по применению, Страница: 31 / 84

31
8. PROBLEMS AND SOLUTIONS
You can solve many simple problems with your temperature control cellar, thus avoiding having to
contact your after-sales department. Try the following suggestions:
PROBLEM POSSIBLE CAUSE
Appliance not running

Check the voltage of the installation

Check your circuit breaker

A fuse has blown
Not cold enough

Check the temperatures set

The ambient temperature means that the
temperatures need to be adjusted

The door is being opened too frequently

The door is not properly closed

The door seal is not sealing correctly

Insufficient free space around the
appliance
No interior light

Contact your after-sales department
The appliance seems unusually noisy

Check that the appliance is level

Check that a piece of paper or part of the
packaging has not remained trapped inside
The door does not close correctly

Check that the appliance is level

The doors have been reversed and
incorrectly fitted

The seal is in a poor condition

The feet have “moved”
The LED does not light

The control panel is defective

Printed circuit board problem

Mains plug problem
In such cases call a qualified professional
LED display error

Poor display quality

Temperature does not display
In such cases call a qualified professional
The fans are not running

Control panel to be replaced by a qualified
professional
Replacing light
This appliance consists of light-emitting diodes (LEDs). This type of diode cannot be changed by the
consumer. The lifetime of these LEDs is normally sufficient for no change to be made. If however, and
despite all the care taken during the manufacture of your chambrage cellar, the LEDs were defective,
please contact your after-sales service for any intervention.