Using the Tube Roller Mixer
Choosing a Suitable Vessel
-
The Roller Mixer should only be used with vessels that are sealed with an appropriate cap to prevent
spillage whilst in use.
Connecting Power
CAUTION
A surge protected power outlet is strongly recommended as it provides some protection for the
equipment in areas of poor electrical quality as well as providing some protection against lightning
strikes. The equipment should be operated on a good, reliable supply of power at all times.
Note: The Roller Mixer should not be operated on the same electrical circuit as other high voltage
household appliances such as fridges, clothes dryers, washing machines or other continuous operation
high voltage devices. These types of devices can create power fluctuations that are undesirable for
electrically sensitive equipment. Consult your workplace administrator or electrical maintenance staff if
you are unsure.
IMPORTANT: Use of an incorrect power supply will void the product warranty and waive all
manufacturer liability for any and all damage caused by such use. If you are unsure about the
rating of your power supply, consult your workplace administrator or electrical maintenance
staff to determine if your power supply is suitable for use with this product before connecting
the power supply.
CAUTION
Regularly check the mains power supply condition over the life of the product, and do not operate the
equipment if you suspect there is damage to any part of the equipment or the mains power supply.
-
Insert the plug end of the mains power supply lead firmly into a properly rated, wall mounted power
supply outlet.
-
Insert the lead end of the power supply into the socket on the rear of the mixer.
If there are double-adapters or oversized DC power packs causing obstruction of the mains power
supply plug, these should first be removed.
-
Ensuring your hands are dry, switch on the power on the mains power supply outlet.
Adjusting The Mixing Control
The Roller Mixer features adjustable mixing speed control to deliver gentle agitation through to
vigorous mixing.
To change the mixing speed
-
Slowly turn the speed control knob clockwise to increase the speed, or anti-clockwise to decrease the
speed.
-
The speed may be adjusted during mixing to achieve the desired level of mixing inside the vessel.
