Technical Specifications
MXS-10
Power requirements
12V DC (300mA or greater)
plug pack tip POSITIVE
Motor
12 volt DC with gearbox
Speed Controller
Solid State Analogue
Speed Range
10 to 60 RPM Variable
Drive
Chain and sprockets
Roller size
30mm diameter x 300mm long
Roller type
Epoxy coated aluminium with stainless steel drive shaft
Roller capacity
1Kg each pair of rollers
Overall Dimensions
L500 X W400 X H120mm
Nett Weight
6.5 Kg
Environmental Conditions
Suitable for use according to IEC 61010-1 standard as follows :
-
Indoor use
-
Altitude up to 2,000m
-
Temperature 0° Celsius to 60° Celsius
-
Maximum relative humidity 80 % for temperatures up to 31° Celsius decreasing
linearly to 50 % relative humidity at 40° Celsius
-
MAINS supply voltage fluctuations up to ±10 % of the nominal voltage
Over-voltage Category – II
Pollution Degree – 2
Disposal
At end of life, this equipment should be disposed of in an environmentally friendly way. This equipment cannot be
disposed of with other general waste, but instead taken to your local or regional waste collection facility for recycling
and/or suitable treatment procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local
government office, your household waste disposal service or your nearest commercial recycling centre.
Nickel Electro Service Contact Information
Contact Us
Nickel Electro Limited
Oldmixon Crescent
Weston Super Mare
North Somerset BS22 7DG
United Kingdom
Telephone : +44 1934 626691
Fax : +44 1934 630300
Email: [email protected]
