Clifford Model RSX3.5 страница 54 Скачать руководство пользователя

Страница: 54 / 60

lloonngg tteerrm

m eevveenntt hhiissttoorryy

The system stores the last two full triggers in memory. These are not erasable. Each time the unit sees a full trigger,

the older of the two triggers in memory will be replaced by the new trigger. To access long term event history:

With the ignition off, press and H

OLLD

D the Valet/Program switch.

Turn on the ignition.

Release the Valet/Program switch.

Press and release the Valet/Program switch within 5 seconds. The LED will flash in groups

indicating the last two zones that triggered the unit for one minute or until the ignition

is turned off.

OTTEE:: The Warn Away triggers are not stored to memory and will not be reported.

ssaaffeettyy cchheecckk

Before vehicle reassembly, the remote system must be checked to ensure safe and trouble-free operation. The fol-

lowing test procedure must be used to verify proper installation and operation of the system. The installation

must be completed before testing, including connection to the brake switch and hood switch.

1. Test the BRAKE shutdown circuit: With the vehicle in Park (P), activate the remote start system. Once the

engine is running, press the brake pedal. The engine should shut down immediately. If the engine continues

to run, check the brake circuit connection.

2. Test the HOOD PIN shutdown circuit: With the vehicle in Park (P), open the hood. Activate the remote start

system. The vehicle should not start. If the starter engages, check your hood pin and connections.

OTTEE:: If programmed for Diesel Mode, the system will turn on the ignition, but the starter should

not engage with the hood open.

3. Test the NEUTRAL SAFETY shutdown circuit:

Содержание Model RSX3.5



























































Результаты поиска

Содержание Model RSX3.5

Отзывы:

Похожие инструкции для Model RSX3.5

Бренды по названию

Популярные бренды

Clifford Model RSX3.5, Руководство по установке

Результаты поиска

Содержание Model RSX3.5

Отзывы:

Похожие инструкции для Model RSX3.5

Бренды по названию

Популярные бренды