How to program Clifford ACG remote controls into the
3-Door Programmable Garage Door Receiver
Your 3-Door Programmable Receiver can recognize as many as 8 different
Clifford remote controls with Anti-CodeGrabbing (ACG). Please note that this
product will not work with older Clifford remote controls. ACG Remote controls
are available from your local Clifford dealer or you may call the Clifford
Customer Service Department toll-free at (800) 824-3208.
To Add a new ACG Remote Control to the Programmable Receiver:
1. To control output 1, tap the blue button on the face of the 3-Door
Programmable Receiver until the red LED for output 1 illuminates.
2. Press the Clifford ACG remote control button (or channel) that you want to
use to activate garage door opener #1. Release the remote control button
when the LED turns off to indicate that the receiver has stored the transmitted
channel in its non-volatile memory.
3. To control a second garage door opener, tap the blue button on the 3-Door
Programmable Receiver until the indicator light for output 2 illuminates.
4. Transmit the channel you want to use to activate garage door opener #2.
Immediately release the button when the Programmable Receiver’s red LED
turns off. Output 2 is now programmed.
5. To program a third garage door opener, tap the blue button on the 3-Door
Programmable Receiver until the indicator light for output 3 illuminates.
6. Transmit the channel you want to use to activate garage door opener #3.
Immediately release the button when the Programmable Receiver’s red LED
turns off. Output 3 is now programmed.
How to delete a lost or stolen remote control
If you wish to delete a lost or stolen remote control, you need to “push” its code
out of the receiver’s memory. Doing so is simple. Just repeat steps 1-6 above for
a total of 8 times with your current remote control. If you are using two remote
controls, repeat steps 1-6 four times for each. If using more than two remote
controls, program each so that the total adds up to eight.
6
Содержание Garage Door Interface
Страница 4: ...4 ...
