How to use your keychain remote control
Clifford Electronics makes two types of
Anti-CodeGrabbing remote controls. The 3-channel
Clifford remote control illustrated to the right and a
12-channel remote control illustrated below. The
3-button/3-channel remote control can command three
different items, while the 4-button/12-channel model
can command the Programmable Receiver’s three
different channels plus up to nine other functions of
additional Programmable Receivers and/or Clifford
vehicle security systems and accessories on your vehicle(s).
You select and transmit the channels in the
following manner:
To transmit either channel 1, 2, 3 or 4:
Just
press either button 1, 2, 3 or 4. For
instance, to transmit channel 3, press
button 3. While you transmit, the LED
indicator will blink once every second:
this indicates level 1.
To transmit either channel 5, 6, 7 or 8:
Press the LevelShift button once. This shifts
buttons 1–4 to level 2 (channels 5–8). Then press the desired button within the next
7 seconds. For instance, to transmit channel 5, press the LevelShift button once,
then press button 1. While you transmit, you’ll notice that the LED indicator blinks
twice, pauses, blinks twice, etc.: this indicates level 2.
To transmit channel 9, 10, 11 or 12:
Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button within
the next 7 seconds. For instance, to transmit channel 12, press the LevelShift button
twice, then press button 4. While you transmit, you’ll notice that the LED blinks
three times, pauses, blinks three times, etc.: this indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels
5–12), the remote control automatically returns to level 1 (channels 1–4).
5
Содержание Garage Door Interface
Страница 4: ...4 ...
