19
© 2 0 0 6 d i re c t e d e l e c t ro n i c s
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labor.
Following is a list of the program settings, with the factory settings in bold:
z
Active
arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door is closed).
z
Arming/disarming confirmation siren chirps
on
or off.
z
Auto-Lock
on
/off/rpm
ON: The doors will lock three seconds after the ignition is
turned on unless a door is open.
RPM: The doors will lock when the engine speed increases
(only availiable with Intellistart 4).
z
Auto-Unlock
on
/off: With this feature on, the doors will
unlock when the ignition is turned off.
z
Passive door locking (with passive arming) or
active
door
locking (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
z
Panic mode
enabled
/disabled: Some states have laws
against siren capability while driving.
z
Full trigger response
30
, 60, or 90 seconds: This determines
how long the full triggered sequence lasts. Some states have
laws regulating how long a security system can sound before
it is considered a nuisance.
z
False Alarm Control Technology (FACT
II
)
on
or off: Please
refer to the FACT
II
section of this guide for a complete
