background image

7

©   2 0 0 6   d i re c t e d   e l e c t ro n i c s

mately once per second showing that the system is actively protecting

your vehicle. If you hear more than two chirps when arming, refer to

the 

Diagnostics

section of this guide. These extra chirps confirm a mal-

function autobypass.

The security system also can be programmed to arm itself 

automatically (called passive arming). If the system is programmed for

passive arming, it will automatically arm 30 seconds after the ignition

is turned off and the system sees you leave the vehicle by opening and

closing a door. Whenever the system is in its 30-second passive-arming

countdown. The siren will chirp twice and the lights will flash twice five

seconds after the last door has been closed. The system is not actually

armed at that point. The system arms and the doors lock (if connected

and programmed for passive locking) at 30 seconds, but the siren will

not chirp. The early chirps provide you with a 25-second warning prior

to arming.

When armed, your vehicle is protected as follows:

z

The LED will flash as a visible theft deterrent.

z

Light impacts will trigger the Warning Zone signal. When
triggered, the siren will sound for a few seconds.

z

Heavy impacts will trigger the system. The triggered
sequence is 30, 60, or 90 seconds of constant siren sound-
ing and flashing parking lights.

z

If a protected entry (door, hood, or trunk) is opened, the sys-
tem will immediately trigger the siren and flash the parking
lights. If any vehicle glass is broken the system will immedi-
ately trigger the siren and flash the lights.

nnoottee:: If any protected entry point (a door or a switch-protected trunk or
hood) is open, the system will not passively arm. Additionally, each
time a protected entry is triggered during the arming countdown, the
30-second countdown starts over.

Содержание CONCEPT 470








































Отзывы: