Clifford 980074 SERIES 11CX, Руководство пользователя

Страница: 16 / 23

11
©
2004 Directed Electronics, Inc.
ignores the input that was active when the system was armed,
until that input ceases. Three seconds after that input ceases, the
system will resume normal monitoring. For example, if your vehicle
has an interior light exit delay and you arm the system before the
light turns off, you may hear a Bypass Notification chirp. Three
seconds after the light turns off, however, normal monitoring
resumes.
NOTE: Bypass Notification does not occur when the system is in remote-
controlled silent arm/disarm mode or if the chirps have been programmed
not to sound.
Your system has a Tamper Alert feature that notifies you of system
triggers that occur while you are away from your vehicle. If you
hear four chirps when you disarm, this indicates that the system
was triggered in your absence. In both cases, the pattern of the
flashing LED system status indicator indicates which zone was trig-
gered (see Table of Zones). The LED does not, however, report when
warn-away responses have activated; it only reports triggered
sequences. The system retains this information in its memory and
will continue to chirp four each time the system is disarmed, until
the next time the ignition is turned on.
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input assign-
ments are listed in the following table, along with spaces to write
in any optional sensors or switches that you have had installed.
Table of Zones
Disarming Diagnostics