50
© 2016 Directed. All rights reserved.
Accessing Commands
Similar to the HD remote, Basic commands are performed when
a command button is pressed directly. To perform Advanced Com-
mands
press
the
button 1 to 4 times to access function levels,
x4
in the table for example implies pressing
4 times. The LED flashes
in groups for a few seconds to indicate the level.
Press
the desired
command button while the LED is flashing to perform the command.
Sensor Bypass operation
The lights flash each time this command is received to indicate the
Sensor bypass type. 2 flashes indicates sensor Warn-away zones
are bypassed, 3 flashes indicates sensor Warn-away and Full Trigger
zones are bypassed. 1 flash indicates sensor bypass is off.
Button Auto Lock
When On, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked, a
fault tone is emitted. To unlock the buttons;
press
the
button followed
by the
button, the buttons unlock and tones play to confirm.
Car Select*
Car 2
must first be turned On (See
Remote Features menu
under the
following
Programming
section to turn on).
Press
and
hold
the
but-
ton for 3 seconds. The remote flashes the LED and beeps once or
twice to indicate the selected Car is 1 or 2,
release
the button for Car
Select or continue to
hold
for programming.
Release
the
button, then
press
and
release
while the LED and
beeps continue to perform Car Select. Once the car is selected a com-
mand can be performed by pressing one of the command buttons.
Содержание 5906X
Страница 1: ...M O D E L 5906X O W N E R S G U I D E THE SCIENCE OF SECURITY...
Страница 2: ......
