3
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
Important Safety Instructions
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Make sure you understand all instructions and
warnings. Keep the manual in a safe place for future reference, along with any warranty
information, your purchase receipt and packaging. If you sell or transfer ownership of
this product, please pass on these instructions to the new owner.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety and cord handling
•
Voltage:
Before plugging in the heater, make sure your outlet voltage and circuit
frequency correspond to the voltage stated on the rating label.
•
Electrical circuit:
Always plug this heater into a separate wall outlet socket. Use a
safe socket with an earthed connection. To ensure you do not overload the circuit,
do not operate another high-wattage product on the same circuit.
•
Connection:
To insert the plug, grasp it firmly and guide it into the outlet.
•
WARNING!
No no extension cord:
Do not use the heater with a power board,
adaptor or extension cord as these may overheat and create a fire risk.
•
Protect the power cord:
• – Do not operate the heater with the cord coiled up; always fully unwind.
• – Do not twist or kink the cord or let it touch heated surfaces.
• – Do not put any stress on the cord where it connects to the product.
• – Never pull/carry the heater by the cord.
• – Arrange the cord away from any traffic areas so no one will trip over it.
• – Do not run the cord under carpeting or cover it with rugs, runners, etc.
•
WARNING!
To reduce the risk of fire, electric shock or injury:
• – Never touch the heater with wet or damp hands or feet.
• – Do not use the heater if any part of it has become wet. Immediately call a qualified
service technician to inspect the heater and replace any part of the electrical
system that has got wet.
• – Never spill liquid into the heater; never immerse the cord, plug or any part of the
appliance in water or other liquids.
• – Do not reach for an appliance that has fallen into water; switch off and unplug
immediately.
•
Damaged cord:
Check the power cord regularly for visible damage. If the cord
is damaged, it must be replaced by the manufacturer or appropriately qualified
personnel in order to avoid any hazards.
•
WARNING!
Damaged heater:
Do not use this heater if there are visible signs
of damage to the heater, after it malfunctions, or after it has been dropped or
damaged in any manner.
