background image

AFTER SALES SUPPORT

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

3

Important Safety Instructions

READ CAREFULLY AND KEEP FOR FUTURE REFERENCE 

Read this manual thoroughly before first use, even if you are familiar with this 
type of product. The safety precautions enclosed herein reduce the risk of fire, 
electric shock and injury when correctly adhered to. Make sure you under-
stand all instructions and warnings. Keep the manual in a safe place for future 
reference, along with any warranty information, your purchase receipt and the 
packaging carton. If you sell or transfer ownership of this product, please pass 
on these instructions to the new owner. 

Always follow basic safety precau-

tions and accident prevention measures when using an electrical appliance, 
including the following:

 

Electrical safety and cord handling

•     Voltage: 

Make sure your outlet voltage and circuit frequency correspond to 

the voltage stated on the rating label. If this is not the case, do not use the 
fan.

•     Water

: To protect against fire and electric shock, do not immerse the cord, 

plug or the fan in water or other liquid, or expose the electrical connections 
to water. Ensure your hands are dry before handling the plug or switching 
on the fan. Do not use the fan outdoors or on wet surfaces. Protect it from 
liquid spills. 

•     Damage

: Check the power cord regularly for visible damage. If the cord is 

damaged, it must be replaced by the manufacturer, its authorised service 
centres or appropriately qualified personnel in order to avoid any hazards.

•    

WARNING! 

Do not pick up or operate the appliance if the supply cord, plug 

or housing is damaged, or after it malfunctions or has been dropped or 
damaged in any manner.

 

In case of damage, contact

 

our after sales support 

centre.

•    Protect the power cord: 

 

- Do not operate the fan with the cord coiled up; always fully unwind.

 

- Do not twist or kink the cord or let it touch heated surfaces.

 

- Do not put any stress on the cord where it connects to the product.

 

- Never carry the fan by the cord.

 

- Arrange the cord away from any traffic area so no one will trip over it.

 

- Do not run the cord under carpeting or cover it with rugs or runners.

•    

WARNING! 

No extension cord, no timer: 

Do not use this fan with an 

extension cord, plug adaptor, external timer or separate speed control 
device.

•     Connection: 

To insert the plug, grasp it firmly and guide it into outlet. 

Содержание FT-40MD

















Отзывы: