CLiC-iT RiDER, Инструкция по эксплуатации и техническому обслуживанию, Страница: 4 / 39

#
Reference: LAN-V2
x1
x3
x4
x3
x3
x4
A
C
D
B
E
F
A C E
B D F
Anchor Body Fix screw.
DIN 933 M10x40
Thin nut.
DIN 936 M10
Anchor Screw.
DIN 912 M8x35 Self-Locking nut.
DIN 985 M8
Fastening part
The Anchor installation and maintenance requires the use of a calibrated
torque wrench.
The installation of the Anchor on the Anchor Wedge or in the Artculated
arm is carried out using the components D and F according to the
assembly procedure of this manual.
A n c h o r a l l o w s a c o n t i n u o u s
movement for CLiC-iT Rider Pulley
along the entire game course. Its
function is to guide the
IMN&CliC-iT
Safety Line cable and keeping it fixed
at a certain point. To do this, 3
gripping pieces press the cable and
prevent any movement.
2
Required tools:
Manual or Digital Torque Wrench
Ex: Irimo
Supported safety cable diameter
12 mm
17mm Hexagonal head
or
17mm Hexagonal socket
! The use of an impact wrench is
not allowed.
! Never exceed the indicated
torque.
! Ignoring these indications can
lead to anchor fracture.
To fix the safety cable,
y o u m u s t e x e r t a
torque of 40 N / m on
each M10 screw.
A torque wrench must
be used to not exceed
this value.
Finally, manually tighten the nuts of each screw.
Ÿ
Don´t clean Anchor with soap or water.
Ÿ
To remove dirt from Anchor use air or a damp cloth.
Ÿ
Avoid long exposure of the product in saline environments.
40 N/m
40 N/m
40 N/m
Anchor
x4
G*
G*
Flat washer DIN 125 M8.
*Only to be used when assembled on articulated arms.
Anchor and Anchor Wedge
assembly Anchor and Articulated arm
assembly
2.5 Assemblies
2.4 Cleaning recommendations
2.3 Essential instructions
2.1 Description
2.2 Anchor components