Cli-mate CLI-DH8D, Инструкция по установке и эксплуатации

Страница: 8 / 16

6 INSTALLATION AND OPERATING INSTRUCTIONS
4. To turn on ioniser function, press ION button. ION LED light will
remain blinking when ionizing function is operating.
5. To set automatic off timer, press TIMER button until LED light
is on desired time 1/2/4/8 hours.
6. As unit operates, condensed water will drain into water
reservoir. When water reservoir is full, unit will beep 10 times
and WATER FULL indicator light will blink. Unit will automatically
stop operating. The water reservoir must be removed and
emptied before unit will operate again.
D. PROTECTION OF INTERNAL OVER HEATING
In the event the unit malfunctions and overheats due to air intake
or air outlet being obstructed or blocked by foreign objects, the
unit will shut down automatically. Unplug unit from wall socket
and allow unit to cool down for a minimum of 5 minutes before
operating the unit again.
Note:
The appliance air vents and air grilles must not be
obstructed at anytime. Air flow is required for the unit to operate
effectively. Place unit in a flat well-ventilated location at least
30cm from wall or other appliances. Units must be placed on
a flat stable surface to reduce possible excessive vibration
and noise.
Fig 1