manualshive.com logo in svg

Cli-mate CLI-DH20-E, Инструкция по установке и эксплуатации

Поделиться
Скачать
Cli-mate CLI-DH20-E Скачать руководство пользователя страница 8

6

 

 INSTALLATION AND OPERATING INSTRUCTIONS

D. OPERATION INSTRUCTIONS

1.   Plug unit into power socket, unit will beep twice.

2.   Press POWER button 

 to turn unit on. The dry air outlet 

air deflector will open and the blue backlight will illuminate 
and turn off after 15 seconds. The LCD display will show 
the working mode, status of unit, ambient humidity and 
temperature.

Note:

 The dehumidification setting is automatically set on continuous 

 and default fan speed is set at High (H).

Note:

 The dry air outlet air deflector will close when unit is turned 

off. Press power button to turn unit off.

3.   MODE button sets up Continuous/Automatic dehumidifying 

modes and Fan speed.

4.   SETTING button confirms the running fan speed or Continuous/

Automatic dehumidifying ratio.

5.   To set automatic dehumidifying relative humidity (RH) ratio, 

press MODE button until LCD display lights up on the icon 

. 

Press SETTING button to select relative humidity (RH) ratio in 5% 
increments between 40% - 80%, and then press MODE to set 
selection, or three seconds after pressing SETTING the desired 
humidity ratio is set and the indicator light will stop illuminating.

Note:

 When setting unit on automatic dehumidification, the 

continuous dehumidifying mode 

 will be cancelled.

Note:

 When the ambient relative humidity is 1% lower than the 

selected relative humidity ratio percentage (RH%), the unit 
compressor will switch off and fan speed will operate at a Low (L).

Note:

 When the ambient relative humidity is 5% higher than the 

selected relative humidity ratio percentage (RH%), the unit will 
switch on and unit will operate at the selected setting.

Note:

 The unit will continuously run, regardless of the ambient 

relative humidity, when continuous dehumidification mode 

  

is set.

6. To set fan speed, press MODE button until LCD display lights  

up on the fan icon 

. Press SETTING button to select 

between high (H) and low (L) fan speed, and then press MODE 
to set selection, or three seconds after pressing SETTING  
the fan speed is set. When fan speed is set the fan icon 

 

will rotate.

Note:

 When the temperature sensor detects the ambient humidity 

is lower than selected setting, fan will work at a low (L) speed.

Note:

 When the temperature sensor detects the ambient room 

temperature to be higher or equal to 32°C, the unit fan speed will 
automatically switch to operate at high (H).

7.   To set continuous dehumidification, press MODE button until 

LCD displays the continuous dehumidification icon 

 and then 

press SETTING to set continuous dehumidification mode.

Содержание CLI-DH20-E

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды