6
INSTALLATION AND OPERATING INSTRUCTIONS
OPERATION INSTRUCTIONS
1. Plug unit into power socket, unit will beep and control panel
lights will illuminate blue before extinguishing. POWER light
will be lit green. Unit is now in standby mode.
2. Press POWER button
to turn unit on. The unit will beep and
the fan will start running. The air outlet cover will automatically
open and display panel lights will illuminate indicating current
settings.
Note:
The purification default setting is at LOW speed mode.
3. To select speed,
press until LED Light is on desired speed-
LOW, HIGH, TURBO, SLEEP.
Note:
To select SLEEP mode on the remote control, press
button.
4. To set automatic off timer, press
until LED light is on
desired time 1/4/8 hours. Unit will automatically switch off
once selected time duration has lapsed.
5. To select AUTO-MODE, press
on the remote control. The
auto-mode icon on the display panel will light up. The icon
colour will change indicating the current air quality. The fan
speed of the unit will change automatically depending on the
air quality as detected by the dust and odour sensors.
PRODUCT SPECIFICATIONS
Air Purifier
Model Code
CLI-AP30
Dimensions (mm)
H679 x W394 x D153
Coverage area
Up to 25m
2
Power consumption
55 watts
Net weight
7.2 kg
Gross weight
8.4 kg
Germicidal UV-C light
8W/253.7nm
Air flow
176m
3
/h
Air change per hour
30m
3
x 6
Clean air delivery rate
105cfm (smoke)
Ozone release rate
Less than 0.05PPM
Noise level in Turbo Mode
<58dB
Noise level in Sleep Mode
<28dB
Replacement filter
CLI-RF-AP30
