8
INSTALLATION AND OPERATING INSTRUCTIONS
CLEANING AND MAINTENANCE
Before carrying out any maintenance or cleaning of the unit, make
sure that the power to the unit is turned off and power cord is
unplugged from the power socket.
External cleaning of unit:
• Do not clean unit with any abrasive cleaning agents or solvents
• Do not apply any water directly to the unit of cleaning
• Only use a soft clean cloth for all cleaning purposes
• Clean the air inlet and outlet with a dry cloth, soft brush or
vacuum cleaner
CLEANING THE PRE-FILTER
It is recommended that the Pre-filters (the removable white layer)
are cleaned every 1-2 weeks of unit operation, depending on the
air quality of the room
To clean the Pre-filter:
1. The removable Pre-filter is attached by Velcro. Gently peel away
the Pre-filter.
2. Fill the sink with lukewarm water and gently hand wash the
Pre-filter under the water for 2-3 minutes or until it is
completely clean.
3. Rinse the Pre-Filter with clean tap water.
4. Use a towel to remove any excess water from the Pre-Filter
5. Allow the Pre-filter to dry for 12-24 hours
6. When the Pre-filter is completely dry, re-attach and place back
into the air purifier. Note: When placing the filters back into the
air purifier, ensure that the white belts are facing outwards and
that the Pre-filters are facing towards the air inlet
