CLF Lighting POSEIDON HYBRID Скачать руководство пользователя страница 5

Страница: 5 / 30

WWW.CLF-LIGHTING.COM

PROTECTION FROM BURNS AND FIRE

•

The

exterior of the fixture becomes hot during use. Avoid contact by persons and materials.

Allow the fixture to cool for at least 5 minutes before handling.

•

Keep

all combustible materials (e.g. fabric, wood, paper) at least 1 metres away from the fixture.

•

Keep

flammable materials well away from the fixture.

•

Ensure that there is free and unobstructed airflow around the fixture.

•

not illuminate surfaces within 8 metres of the fixture.

•

not attempt to bypass thermostatic switches or fuses.

•

If you relay power from one fixture to another using power throughout sockets, do not connect more than five
fixtures in total to eachother in an interconnected chain.

•

Connect

only other fixtures to fixture power throughout sockets.

•

not stick filters, masks or other materials onto any optical component.

•

not modify the fixture in any way not described in this manual.

PROTECTION FROM INJURY

•

Fasten

the fixture securely to a fixed surface or structure when in use. The fixture is not portable when installed.

•

Ensure that any supporting structure and/or hardware used can hold at least 10 times the weight of all the devices
they support.

•

Allow

enough clearance around the head to ensure that it cannot collide with an object or another fixture when it

moves.

•

Check

that all external covers and rigging hardware are securely fastened.

•

Block

access below the work area and work from a stable platform whenever installing, servicing or moving the

fixture.

•

not operate the fixture with missing or damaged covers, shields or any optical component.

lamp life

•

Lamp life can vary, caused by many factors. For example external temperature, humidity, lamp strikes, dimming or

power/voltage.

Содержание POSEIDON HYBRID































Результаты поиска

Содержание POSEIDON HYBRID

Отзывы:

Похожие инструкции для POSEIDON HYBRID

Бренды по названию

Популярные бренды

CLF Lighting POSEIDON HYBRID, Руководство пользователя

Результаты поиска

Содержание POSEIDON HYBRID

Отзывы:

Похожие инструкции для POSEIDON HYBRID

Бренды по названию

Популярные бренды