CLF Lighting HERA, Руководство пользователя

Страница: 14 / 25

WWW . CLF - LIGHTING . COM 12 . 0
Software type
Shows software version
(
Vx
.
x
)
Usage time
Use of time and use time reset (password)
Temperature
LED board current
temperature
UID Shows the unique ID for the RDM protocoll. <0x02E20002xxxx>
Information
Factory reset
Resets the fixture to its factory default settings
.
Please reboot power before reset takes effect.
DIMMER MODE
provides f ive dimming options
(
see picture below):
O
ut
pu
t
O
ut
pu
t
O
ut
pu
t
O
ut
pu
t
DMX %
LINEAR
DMX %
SQUARE LAW
DMX %
INVERSE SQUARE LAW
DMX %
S-CURVE
O
ut
pu
t
DMX % Up DMX % Down
SPECIAL
l
LINEAR – the increase in light intensity appears to be linear as DMX value is increased.
l
SQUARE LAW – light intensity control is finer at low levels and coarser at high levels.
l
INV Square law – light intensity control is coarser at low levels and finer at high levels.
l
S-CURVE – light intensity control is finer at low levels and high levels and coarser at medium levels.
l
Special – the light intensity was linear increase with DMX value , and light intensity control is finer at low level
with DMX values decrease , the dimmer speed will also has effect on it
Whichever DIMMER CURVE option you select , you can choose between NORMAL or SMOOTH 1 / 2 / 3 / 4 dimming
settings :
l
NORMAL is the default setting. It gives a virtually instantaneous reaction when you dim from one intensity to
another
,
but dimming slowly from one intensity to another may appear slightly uneven .
l
The MOOTH 1 / 2 / 3 / 4 setting gives smoother dimming during slow changes in intensity, but it limits the speed
of dimming changes slightly
.
This makes it ideal for slow
,
smooth dimming
,
but a short time - lag may be
noticeable if you try to dim quickly from one intensity to another .