Clevo P570WM, Руководство по обслуживанию, Страница: 15 / 24

Disassembly
2 - 6 Removing the Optical (CD/DVD) Device
2.Disassembly
Removing the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery ( page 2 - 5 ).
2. Locate the hard disk bay cover and remove screws - , and remove the bay cover .
3. Remove the screw at point , and use a screwdriver to carefully push out the optical device at point .
4. Push the optical device drive out of the bay and reverse the process to install the new device.
Figure 2
Optical Device
Removal
a. Remove the screws.
b. Remove the cover.
c. Remove the screw.
d. Push the optical device
out of the computer.
1 2
3
4 5
6

3. Hard Disk Bay Cover
6. Optical Device
• 3 Screws
a. d.
b.
3

Blu-Ray Device Bezel Removal
Note that some Blu-Ray modules (e.g. Pio-
neer) have a small piece of mylar inserted in
the left side (as viewed front on) of the bezel
cover; in order to prevent the bezel cover of
the module from being removed accidentally.
If you need to replace the bezel cover, you will
need to use a screwdriver to ease out and re-
move the mylar before attempting to remove
the bezel cover. You will need to re-insert the
mylar when replacing the bezel cover.
1 2
5
c.
6
4