Disassembly
Removing the VGA-2 Card 2 - 25
2.Disassembly
Installing the VGA-2 Card
1.
Connect the master and slave cable
to the two VGA cards before preparing to fit the VGA-2 card
into the slot
by holding it at about a 30° angle.
2.
The card needs to be fully into the slot, and the VGA card and socket have a guide-key and pin which align to allow
the card to fit securely.
3.
Fit the connectors firmly into the socket, straight and evenly.
4.
DO NOT attempt to push one end of the card in ahead of the other.
5.
The card’s pin alignment will allow it to only fit one way.
Make sure the module is seated as far into the socket
as it will go
(none of the gold colored contact should be showing). DO NOT FORCE the card; it should fit without
much pressure.
6.
Secure the card with screws
&
).
2
1
3
4
a.
b.
3
4
1
NVidia VGA Cable
AMD VGA Cable
2
1. VGA-2 card Module
•
2 Screws
Figure 21
VGA-2 Card
Installation
a. Carefully connect the
VGA cable before insert-
ing the VGA Card.
b. Tighten the screws.
Содержание P375SM
